How to unclog your bathtub drain easy


A clogged drain (apofraxeis Kallitheas) is never a perfect situation for any home. Do you find yourself in the typical circumstance of taking an unintended bath each and every time you shower, consistently possessing the water to achieve your feet or even greater?

If you are working with a whole lot of standing water in your bathtub soon after each and every shower or bath, then you most very likely have a clogged bathtub drain. It is crucial to unclog your bathtub drain as before long as achievable because standing water can produce a lot more troubles for your home and toilet.

Experts from drainage cleaning companies like Αποφράξεις Αντωνίου Καλλιθέας are giving us some helpful advice.


Hazards Posed From Standing Drinking water

Relying on the severity of your bathtub’s clog, you may be dealing with standing water sitting in your tub for hours or even times. Standing water can be the result of several issues in your house.  Standing water is a breeding ground for bugs, mostly mosquitoes, flies, and dragonflies that will be a nuisance to you if authorized to achieve its grown-up form and carry on to breed. Mosquitoes and Flies the two carry an assortment of ailments that could hurt the two people and pets. These bugs also host parasites like heartworms and tapeworms.

Standing water leads to mold and mildew to type this is a respiration hazard for anyone in the home. If you are noticing your standing water to be receiving larger with every single shower, then it will benefit you to get in touch with a specialist grasp plumber from Benjamin Franklin Plumbing to unclog the drain for you. If you have selected to go the route of fixing the dilemma your self, listed here are some suggestions to support you consider to unclog that bathtub drain and allow you to chill out in the shower again.

Just before beginning any of these steps, take the needed steps to distinct your tub of any standing water, or else you will just add far more water to your tub.

What do you need to start the procedure

  • Rubber Gloves
  • Plunger
  • Plumber’s Snake
  • Screwdriver
  • Bucket
  • Rag or some kind of cloth to use for blocking
  • Sponge

Get rid of All Noticeable Blockage From Your Drain

You can do this basic search and resolve with your fingers. We always advise sporting gloves if you are heading to be making speak to with all the gunk that has accrued in your bathtub’s drain. A lot of bathtub clogs are induced by undesired hair, cleaning soap scum, or other restroom goods-producing its way into your drain.

Sometimes these blockages can be very noticeable and can easily be cleared out with your fingers. A regular occurrence is a massive hairball that has accumulated in your drain. Right after performing this, check out to see if the drinking water can drain from your tub.

Plunge Your Bathtub

If you have removed all the obvious blockage from your drain and find that your bathtub is nevertheless not draining then, it is time to plunge your bathtub drain. Remember to eliminate any standing drinking water from the tub before beginning. Take your screwdriver and eliminate the overflow cover this is generally situated beneath the faucet. Examine the coil and take away any hair or substance that is blocking it. Now that you have taken off the overflow protect take your rag and jam it in the hole of the overflow opening. Make confident you stick it in there tight, this is to make certain that no air escapes when you endeavor to use your plunger.

We must mention that as you begin plunging, your rag will be pushed out from the air trying to escape. So, it is essential to use a free hand to maintain your rag lodged into the overflow opening. If you could have one more man or woman whose task is to maintain the rag in a spot it will make this entire procedure a lot smoother.

Now that the preparations have been made start plunging your bathtub’s drain. Dedicate an excellent volume of time to carrying out this. If you have never used a plunger ahead of then, it is easy to suppose that this strategy is not functioning. But, give it some time and effort and you might be rewarded before long adequate. You will know you are profitable when you commence listening to the drinking water drain. If this approach proves productive, and your pipe looks clear, then proceed to run some hot drinking water using your drain to very clear any remaining residue that was causing the blockage.

If this strategy did not work either, then we would advise snaking the drain next.

Utilizing a Plumbing Snake to Unclog Your Drain

This can be tough if you have no familiarity with utilizing a plumbing snake. If you are not sure about how to use a plumbing snake and plunging did not perform then, we very suggest contacting a specialist to help correct this situation. If you have attempted the plunging approach than your overflow protects should presently have been removed. Get your plumbing snake and insert it into the opening left from getting rid of the overflow go over. You are going to feed the snake by way of the hole until finally, you meet up with some pushback or resistance in the pipe.

When you hit this resistance, it is time to consider using your snake to split the clog aside or try to go it down the drain each will function in unclogging your bathtub’s drain. After you have been achieved with some resistance, switch the snake counter-clockwise to snake it into the clog. If the clog fails to split apart, then you will have to try to pull the clog out from the overflow opening.

If this does not work both, you can try a residence treatment drain cleaner.


Unclog Bathtub Drain Without Chemicals

We comprehend that numerous men and women do not like the concept of dropping chemical substances into their drains to try out to unclog it. This tends to make perception as several liquid drain cleaners can make the scenario worse and clog up the drain even more. Also based mostly on the variety of plumbing pipes you have, liquid drain cleaners can also rust or erode your pipes.

What you will want for this method:

  • Baking Soda
  • 1 Cup of Vinegar
  • Scorching water

You can commence with a half cup of baking soda and pour that down the bathtub’s drain. Genuinely get that baking soda in there. Now functioning with your vinegar, pour half of your cup down the drain slowly, you ought to begin to see some “fizzing” happen. When you discover this occurring, include the drain, and wait for the fizzing to end. After the fizzing has stopped, continue to do it once more.

See more about plumbing services:

A DIY guide of fixing a slow draining toilet


Toilets that aren’t flushing correctly can be a sign of a larger problem that can cost you a bunch of money. If you can repair the problem by yourself before it grows a serious matter, then you can save money on plumbing ΑΠΟΦΡΑΞΕΙΣ ΠΕΡΙΣΤΕΡΙ – costs and your annual service bill. In this guide, we’ll walk you through everything you need to know about fixing your slow draining toilet.

What causes a Slow draining toilet? 

Before we get into the various ways you can fix a moderate flushing latrine, we should initially go over the various causes. When we find out about what is influencing the difficult it ought to be a lot simpler to make sense of how to fix it. 

Low water levels in your toilet tank 

The main thing you need to check while scanning for the reason for moderate seepage is the latrine tank. Expel the can tank top and put it in a sheltered spot. At that point check your tanks fill level. In the event that the tank water looks lower than expected, at that point the issue is likely your latrine tank. At the point when your latrine has a low water power it doesn’t have a lot of power behind its flush. 

In this manner, it prompts a moderate flushing latrine. There can be an assortment of explanations behind low water levels in your tank. More often than not it’s because of reasons outside your ability to control. Support can help, yet latrine parts and frameworks will separate after some time. We frequently tight it down to things like a messed up fill tube, broke tank, or harmed fill valve — yet it can emerge out of any number of things. 


Blockage in the drain 

Consistently one out of five Americans manages a blocked channel. In this way, factually, you’ll have to manage it sometime in the not so distant future. Regularly an obstructed can is evident even to somebody who thinks nothing about pipes(apofraxeis). 

In any case, once in a while the issue isn’t so straightforward. The blockage can be halfway or happen further down the framework. Framework blockage is a lot harder to manage than a basic obstructed latrine. 

So how would you know whether you have channel development in your sewage framework? 

One great way you can check is with a gallon of water. Take the water and empty it into the latrine bowl. On the off chance that the water promptly rises, at that point the issue is an obstructed channel. If the water sinks or remains the equivalent, at that point the issue is almost certain in the latrine tank. For a far-reaching guide, here are how to unclog a straightforward can. 

Mineral build-up in the rim 

In the event that you find that your can bowl despite everything channels appropriately — yet gradually — at that point the issue may lie in the fly gaps that encompass the edge of the can bowl. 

The development of residue and minerals at the edge of these openings can bit by bit diminish the water pressure discharged with each flush. In the following area, we’ll go into the various ways you can fix these issues. 

Various ways you can fix a slow draining toilet 

On the off chance that you’re heart set on fixing the latrine without anyone else, at that point these are a portion of the things you ought to consider during the fix procedure. We prescribe pausing for a moment to invigorate yourself on the pieces of a latrine. 

Be that as it may, on the off chance that you aren’t sure about your fix aptitudes, at that point don’t feel awful about calling an expert handyman. Here and there property holders that don’t have a clue what they’re doing with regards to plumbing can cause more damage than anything else. 

Expel the damaged fill tube 

The fill tube is a little, yet a significant segment in the inside of the latrine tank. The cylinder is generally dark and made of adaptable elastic. It leads into a wide vertical cylinder known as the flood tube. Each time you flush the fill tube is liable for moving water from the tank to the bowl. Extra time the fill cylinder can become harm from common mileage, during which it will in the long run unclip. 

At the point when this happens the tank will load up with water which makes the valve shut off. Accordingly, water gradually fills the bowl. You can fix this issue by examining the fill tube in your latrine tank. On the off chance that the cylinder shows up in great condition yet is detached, at that point you can essentially join it back onto the chamber. Be that as it may, on the off chance that the cylinder seems harmed, at that point you should supplant it. 

Supplant a cracked toilet bowl 

This issue isn’t as basic as a harmed fill tube, however, it can occur. At times a break can happen inside the lower bowl of the latrine. This break will make water step by step trickle out. 

You can distinguish it by puddles around the base of the can. The water in the latrine will likewise be observably recharged. Shockingly, there is no straightforward fix for a split can bowl. Any fixing operators you apply will probably be transitory, best case scenario. You will probably need to supplant the entire can and introduce another one. On the off chance that you don’t feel good introducing another latrine, at that point call your neighbourhood handyman. 

Managing a blocked sewer line vent 

A sewer line vent is a funnel that runs out the wash room divider and up to the top of a house or building. The channel’s main responsibility is to give outside air that will move water through the seepage framework. The sewer line vent additionally forestalls poisonous sewage gases from entering your home. Shockingly, this pipes segment is helpless to obstruct. 

What causes the stops up? 

Anything from tree limbs to dead squirrels — whatever can fit in the channel. Contingent upon the seriousness of the obstruct the water level on your can be influenced since air essentially isn’t traversing. 

You can attempt to manage the sewer line vent yourself by accessing your rooftop. Check whether anything outer is obstructing the channel. In the event that not, at that point sparkle an electric lamp down the funnel. You may see a stop up if it’s not very far down. If you can arrive at it, at that point take a handyman’s snake and attempt to oust it. You should call a handyman on the off chance that you can’t unstick without anyone else. 

Unclog the toilet with a plunger 

Some of the time the purpose behind moderate flushing can is as basic as a stopped up a channel. Stops up can occur for an assortment of reasons, yet the most widely recognized answer is that somebody flushed something they shouldn’t have. 

On the off chance that you find that the water level stays high for a moment or two after you flush, at that point there is likely something obstructing the progression of water. There is a wide range of ways you can manage this issue however we suggest one of two techniques. The primary technique is with an plunger

On the off chance that you have an plunger, at that point embed it into the can. Ensure you wear gloves and have a decent beginning seal — things may get chaotic. Give the principal plunge a delicate push. Recollect that the plunger is loaded with air, so a hard first dive with send water spilling in reverse all over you. When you finish the underlying dive, you can start pushing in and out quicker with the unclogger. 

Ensure you keep up the seal. Recollect that plunging is a steady procedure. A profound obstruct may take somewhere in the range of fifteen and twenty minutes of consistent plunging to slacken. Stick with it and show restraint. In the event that it despite everything appears to be sad, at that point attempt our second strategy for unclogging. 

Unclog with a combination of drain cleaner and dishwashing soap 

The second technique for unclogging a latrine includes channel cleaner, dishwashing cleanser, and heated water. In the first place, pour one gallon of high temp water into the can bowl. Permit it to sit and oust whatever might be stopping up the channel. 

Likewise, remember that you shouldn’t pour boiling water on the off chance that you have an old porcelain can. Heated water may cause breaks in the toilet, which require substitution. While the boiling water sits in the bowl, discover some can endorse channel clean. Empty a limited quantity into a bowl. Either flush it quickly or let it sit contingent upon the cleaner’s directions. 

Next, evacuate the top on the latrine tank. Discover the flood pipe and pour one tablespoon of dishwashing cleanser into it. Give the dishwashing cleanser ten minutes to leak down the flood pipe. It will expel some calcium stores during this time. Following ten minutes you can flush the latrine. This should evacuate both the stop up and a portion of the mineral stores. 

Expel the Mineral Build-up Around the Jet Holes 

If you find that your stream gaps despite everything have mineral development after the dish cleanser strategy, at that point you may require an increasingly physical technique for evacuating them. One way you can attempt includes a screwdriver and a mineral remover specialist. Apply a cleaner to the outside of the stream openings and let it sit for a couple of moments. At that point, take a little screwdriver, or comparative gadget, and truly scratch the mineral stores from the openings. 

In the event that you find that this procedure despite everything doesn’t evacuate the development, at that point you will probably need to call a plumber to help.

See more about sewer system backups:

5 Plumber Secrets That You Should Know Today


5 Plumber Secrets That You Should Know Today

Most people have ever hired a plumber at one time or
another. You will note that plumbers usually help solve various plumbing issues
in different homes and properties. However, have you ever wondered what it is
like to be a plumber (υδραυλικος) ? You will note that we normally experience different
challenges from time to time. Some of these things might shock you. However, we
are used to them. The following are some plumber secrets that you should know:

1. We find weird things when cleaning the drains

Blocked drains is one of the main problems that most
homeowners experience. There are many things that can make your drains to get blocked.
In most cases, most homeowners usually flush sanitary towels, paper towels and
other items down the drainage system. This can make your drain to get blocked. You
should not put these items in your toilet bowl as it might get clogged in the
long run. However, we have ever come weird items in most drainage systems.
These include:


You might be wondering how dentures got into your drainage
system. However, this is common in most homes. Someone might have dropped his
or her dentures in the toilet at night and mistakenly flushed them.

·Video game systems

If you have a kid at home, they might misplace the game accessories.
It is not a wonder to find these accessories in the drainage system. We usually
find such item in most drainage systems. This can make your drainage to get
blocked too.

·Beer cans

Most people normally like taking beer during ceremonies. You
will not that these cans can find their way into your drainage system without
your knowledge. Someone might even drop his or her beer can in the toilet and
try to flush. The bad news is that these cans can make your toilet to get

·Live animals

Sometimes, we find live animals in the drainage systems. These
include snakes, rats, cockroaches and so on. Sometimes, we usually find dead
animals too. These include rats and other small animals. These animals can
block your drainage system.

2. We have a language of our own

Have you ever tried to listen to plumber speak to each
other? You will note that they normally use certain words that might be difficult
for you to understand. You might not understand some of the terms that we use when
we are working. Some of these terms might seem inappropriate to you. However, we
usually know what we are saying. The following are some plumbing terms that you
are likely to hear out there:


This might sound inappropriate to you. However, this usually
refers to the piece of pipe that helps connect two larger pipes together.

·Sweating the pipe

This basically refers to soldering two pipes together in
order to make them leak-proof.

3. We usually have many stories to tell

You will note that we usually meet several people in a day.
Each one of them usually has a different plumbing problem that needs to be
solved. Some of them usually have complicated issues that need more expertise and
competence. This has made us more experienced in this area. In addition, this
has made us learn several facts about plumbing. We are also very friendly to
our customers. In this case we usually share stories with our customers once in
a while. This makes plumbing jobs to be more enjoyable.

4. Our profession is quite old

You will realize that plumbing is one of the oldest
professions out there. It has been there over 5000 years ago. People used to experience
plumbing issues since 3000 B.C. In this case, they had to get helped by
plumbers back them. The good news is that we have modern plumbing tools and techniques
that can help solve plumbing issues more easily.

5. We are human beings like you

Some people normally think that plumbers are extraordinary
people However, this is not true. We usually get tired at the end of the day.
Our bodies need to relax at the end of the day and get revitalized. Sometimes, we
usually get bored and therefore need to get entertained. There are moments when
we might not offer quality services as you might expect. You should not project
your frustrations to us. We are not perfect. However, you need to inform us so
that we can do a good job and help you. We are always ready to offer quality
services to you.

Those are some plumber secrets that you should know. We are
normal people and have feeling too. You should be patient with us and allow us
to serve you. Consider this and you will not be frustrated.